Skip to main content

What is a Single beam overhead crane?

 What is a Single beam overhead crane?



A single beam overhead crane is a kind of lifting equipment that is used to lift materials horizontally over workshops, warehouses, and stockyards. Because its two ends are located on tall concrete columns or metal supports, it looks like a bridge. The bridge of a single beam overhead crane runs longitudinally along the crane rail track laid elevated on both sides, which can make full use of the space under the bridge to lift materials without being hindered by ground equipment. It is the most widely used and the largest number of lifting machinery.

A single beam crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single beam overhead crane is widely used in indoor and outdoor industrial and mining enterprises, the iron, and steel chemical industry, railway transportation, port and wharf, logistics turnover, and other departments and places.

The working performance of a single beam overhead crane has a great relationship with lifting, span, and lifting height. In short, the smaller the lifting, the smaller the safety factor. The working level is generally A3. The matching track is better overlapped with the wheel.

Generally, the lifting capacity is less than 50t and the span is less than 35m. Without special requirements, a single beam overhead crane should be selected. If the gate leg is required to be wide, the working speed is high, or the heavy and long parts are often lifted, the double beam gantry crane should be selected. And the single beam overhead crane is a crane that suspends and fixes the beam on the walking track (I-beam) of the building. The position and span of the walking track can be set freely, which is most suitable for the production line.

Comments

Popular posts from this blog

30 LB RAIL FOR SALE

  30 LB RAIL FOR SALE What is a 30 lb rail? A 30 lb rail refers to a rail weighing 30 lb in meters, which is an ASCE 30 model rail produced according to ASTM A1. As a common light track, it is mainly used for laying mining track lines. Therefore, it is widely used in the South American market. The dimensions of the 30 lb rail are as follows: Head width: 42.9mm Track height: 79.4mm Track bottom width: 79.4mm Waist thickness: 8.4mm GloryRail is an important  mining rail  supplier in China. Engaged in rail supply for more than 20 years. Rail products are exported to many countries and regions around the world. Trusted and supported by many mining customers. We maintain long-term cooperative relationships with many important customers in Peru, Colombia, Panama, and Venezuela in South America BUY 30 LB RAIL FROM CHINA As the world’s most important rail tracks production base. There are six major steel mills in China producing rails with an annual output of millions of tons. G...

Rail clip installation

Rail clip installation rail clip installation Prerequisites for the rail clip installation 1. The rail presser is installed after the steel beam on the crane rails surface is adjusted; 2. The steel beam of the crane must be 3. The rail pressure device should be installed; 4. Before the installation of the  rail clamp , the surface paint of the crane beam is finished and meets the requirements of the current regulations; 5. Before the installation of the rail presser, the track joints should be connected, and the track joints and side bending deviations should meet the requirements of “Steel Structure Engineering and Acceptance Specifications”-83). 6. The welding of the base plate control plate and the steel suspension beam should meet the design requirements. Installation sequence and essentials A. Welding the fixed base, the fixed base can be used, the three grooves on the surface and the position of the rail presser can be positioned, and the allowable deviation of the position ...

What are railway rail fasteners?

What are railway rail fasteners? Railway rail fasteners Railway rail fasteners are a kind of railway accessories. The parts used to combine rails and sleepers (or other types of under-rail foundations) on the track are also called central joint parts. Its function is to fix the steel rail on the sleeper, maintain the gauge and prevent the longitudinal and lateral movement of the rail relative to the sleeper. The railway rail fastener system is divided into the shrapnel fastener system, gusset fastener system, and elastic strip fastener system. The gusset-type fastener is composed of a gusset plate, a threaded spike, a spring washer, an iron seat, and a buffer pad. The threaded spike is anchored in the reserved hole of the concrete sleeper bearing platform with sulfur cement mortar, and then bolts are used to fasten the buckle. Plate fastened. There are elastic strips I, II, and III types of clip fasteners. Type I elastic strip is composed of ω elastic strip,  screw spike , gauge b...