Skip to main content

How to install fish plate in railway

 How to install fish plate in railway

Rail joint, also known as the fish plate in railway, is a common accessory on railway tracks. As a major railway country, China uses different types of rails and different models. Therefore, for the fixed parts such as road splints, the specifications are also different. Fishplate is a common fastener on rails. In addition to testing the quality of the fishplate, it should also be installed to prevent improper installation and affect its normal use. Let’s follow the splint manufacturer to see how to install the fish plate on the railway.

fish plate in irailway

fish plate in railway

1. When screwing on the bolt, pay attention to make the opening of the spring washer downward;
2. The order of the bolts, such as using a four-hole fish plate, first tighten the middle two, then the two sides, after tightening the two sides, and then tighten the middle once;
3. When screwing the bolts, one person shall use a 55cm screw wrench as the criterion, and a too long screw wrench or two people shall not be used for screwing;
4. When the bolts cannot be worn, use a hammer to hit both ends of the fishplate, align the eyes, and do not drive the screws in with a hammer;
5. The contact part between the fish plate and the rail and the bolts should be oiled;
6. When threading the fishplate bolts, the positions of the bolt caps must be staggered from inside and outside.

Through the above understanding, we also know more about the installation method of the fish plate in the railway and have a deeper understanding of the fish plate. After all, the fish plate is an accessory used on the rails.
According to the material, there are: Q235: Chemical composition (melting analysis) of plywood steel is less than or equal to 15kg/m and greater than 15kg/m by model
It should meet the requirements of Q235-A (or No. 3 B steel) and Q255-A (or No. 4 B steel) steel in GB 700 respectively.

Ductile iron: QT400-18 is placed in the field with the rails all year round. If the maintenance work of the fishplate is not done well, it will be damaged by the extrusion and friction of the train and the rail for a long time. . Therefore, the maintenance personnel should regularly repair the rails, and if the fish plate is found to be faulty, it should be replaced in time.

Comments

Post a Comment

Popular posts from this blog

EN R260 R350HT 60E1 UIC60 Steel Rail

  EN R260 R350HT 60E1 UIC60 Steel Rail Glory Rail  can supply all kinds of steel rails, including light rail, heavy rail, crane rail, and other different standards and specifications, like EN standard 60E1 UIC60 steel rail. 60E1 UIC60 steel rail  is mainly used as transportation railway rail for heavy vehicle, and it can be also used in underground mining and crane industry. Glory Rail could also offer EN standard rails, including 60E1 steel rail,  UIC60 steel rail, 54E1 steel rail, UIC54 steel rail., etc.  Specification: Size: 60E1 UIC60 steel rail Length: 5m~25m or other length according to customers’ requirement Material:  R200, R260, R260MN, R350HT Standard:  EN 13674 – 4 Materials: R200 Mechanical Property Chemical Composition Yield strength Tensile strength Elongation Hardness C Si Mn S P H ppm O  ppm MPa kg/mm² MPa kg/mm² min HB ≤ ≤ ≤ ≤ ≥680 14% 200-240 0.40-0.60 0.15-0.58 0.70-1.20 0.025 0.035 3.0 20 ………………………………………………………………………………………… R260...
Post a Comment
Read more

Development of A32 and A36 High Strength Shipbuilding Steel Plates

Development of A32 and A36 High Strength Shipbuilding Steel Plates Since the 1990s, China’s  shipbuilding steel plates  industry has entered the international market on a large scale, and the shipbuilding steel plates industry has gradually become one of the pillar industries in China. With the development of shipbuilding steel plates in the direction of large-scale and light-weight, the general strength ship plates can no longer meet the needs of the hull, and the proportion of high-strength ship plates will continue to increase. Therefore, the development of high-strength shipbuilding plates has broad market prospects. Structural steel for hull can be divided into general strength steel and high strength steel. A32 and A36 are one type of structural steel for high strength hull. With the development of the shipbuilding industry, the requirements for materials are becoming more and more demanding. At present, in the factory approval, besides the certification of the ...
Post a Comment
Read more

Study on Cooling Method of SUP9 Spring Flat Steel

Study on Cooling Method of SUP9 Spring Flat Steel Hot rolled spring flat steel bar is mainly used for the automotive industry, and it’s the raw material for automobile leaf spring  manufacturing. The main varieties of spring steel include 60Si2Mn spring steel,  SUP9 spring steel flat bar , 55SiMnVB spring steel. SUP9 spring steel flat bar is produced in accordance with the Japanese standard. At present, many leaf spring manufacturers mostly use SUP9 spring steel as the raw material for manufacturing automotive leaf springs. Compared with 60Si2Mn, SUP9 spring steel has good hardenability and low decarburization tendency, so the mechanical properties and fatigue properties of the leaf springs produced with SUP9 spring steel are better than that of 60Si2Mn steel. However, due to the good hardenability of  SUP9 steel , the hardness is often too high during actual rolling production and cooling. The reheating, quenching and tempering treatment are carried out in...
Post a Comment
Read more