What is a gantry rail?

The gantry rail refers to the track on which the gantry crane travels. A Gantry crane is a variant of a bridge crane. In the port, it is mainly used for the loading and unloading of outdoor cargo yards, stockyards, and bulk cargoes. Its metal structure is like a door-shaped frame, and two feet are installed under the bearing main beam, which can walk directly on the track on the ground, and the two ends of the main beam can have outrigger cantilevers. Gantry cranes have the characteristics of high site utilization, large operating range, wide adaptability, and strong versatility, and are widely used in port cargo yards.
Selecting a suitable gantry rail is very important to the stable operation of the crane. Usually, the crane supplier will give the cross-section requirements of the rail according to the parameters of the crane produced and the type of wheels. The specific installation and required accessories need to be confirmed according to the actual situation of the site. Some crane manufacturers can provide materials such as rails and accessories, but because they are not directly engaged in the sales of rail materials, the cost of the rails and accessories they are equipped with is very high. In addition, the track accessories are not produced by themselves, and the installation guide will be relatively lacking, so it is very important to choose a reliable gantry track supplier.
GloryRail has been specialized in crane rail systems for more than 15 years. It can provide a full range of gantry rail tracks and its fixed installation accessories, and provide technical support for the overall solution of crane rail installation. Choosing the GloryRail crane rail system can effectively reduce the installation and use the cost of the rail system.

Comments

Study on Cooling Method of SUP9 Spring Flat Steel

Study on Cooling Method of SUP9 Spring Flat Steel Hot rolled spring flat steel bar is mainly used for the automotive industry, and it’s the raw material for automobile leaf spring manufacturing. The main varieties of spring steel include 60Si2Mn spring steel, SUP9 spring steel flat bar , 55SiMnVB spring steel. SUP9 spring steel flat bar is produced in accordance with the Japanese standard. At present, many leaf spring manufacturers mostly use SUP9 spring steel as the raw material for manufacturing automotive leaf springs. Compared with 60Si2Mn, SUP9 spring steel has good hardenability and low decarburization tendency, so the mechanical properties and fatigue properties of the leaf springs produced with SUP9 spring steel are better than that of 60Si2Mn steel. However, due to the good hardenability of SUP9 steel , the hardness is often too high during actual rolling production and cooling. The reheating, quenching and tempering treatment are carried out in...

30 LB RAIL FOR SALE

30 LB RAIL FOR SALE What is a 30 lb rail? A 30 lb rail refers to a rail weighing 30 lb in meters, which is an ASCE 30 model rail produced according to ASTM A1. As a common light track, it is mainly used for laying mining track lines. Therefore, it is widely used in the South American market. The dimensions of the 30 lb rail are as follows: Head width: 42.9mm Track height: 79.4mm Track bottom width: 79.4mm Waist thickness: 8.4mm GloryRail is an important mining rail supplier in China. Engaged in rail supply for more than 20 years. Rail products are exported to many countries and regions around the world. Trusted and supported by many mining customers. We maintain long-term cooperative relationships with many important customers in Peru, Colombia, Panama, and Venezuela in South America BUY 30 LB RAIL FROM CHINA As the world’s most important rail tracks production base. There are six major steel mills in China producing rails with an annual output of millions of tons. G...

Rail clip installation

Rail clip installation rail clip installation Prerequisites for the rail clip installation 1. The rail presser is installed after the steel beam on the crane rails surface is adjusted; 2. The steel beam of the crane must be 3. The rail pressure device should be installed; 4. Before the installation of the rail clamp , the surface paint of the crane beam is finished and meets the requirements of the current regulations; 5. Before the installation of the rail presser, the track joints should be connected, and the track joints and side bending deviations should meet the requirements of “Steel Structure Engineering and Acceptance Specifications”-83). 6. The welding of the base plate control plate and the steel suspension beam should meet the design requirements. Installation sequence and essentials A. Welding the fixed base, the fixed base can be used, the three grooves on the surface and the position of the rail presser can be positioned, and the allowable deviation of the position ...

Glorysteelwork

Search This Blog