Skip to main content

What is crane rail system

 

  • crane rail system

    What is crane rail system

    What is the Crane rail system?

    The crane rail system consists of rail, rail clip, rail joint, rail pad, and other rail accessories.

    Crane rail is a crane running route laid by steel rail, which can ensure that the crane runs along the specified line and transmit wheel pressure to the foundation. The rail is usually composed of two-wheel rails. The top of the rail is convex, and the ground is a flat plate with a certain width, which increases the contact surface with the foundation. The section of the rail is mostly I-shaped and has good bending strength. When the crane is running, the rail cannot move horizontally and longitudinally, and the rail should be easy to adjust. The fixed parts of rail and rail shall be free of crack, looseness, and corrosion; If there is any crack, it shall be replaced in time, and other defects shall be handled in time.

    As for the installation of the crane rail system, there are two kinds of rail beams commonly used for installing rail: one is steel structure beam and the other is concrete precast beam. The installation methods of crane rail include pressing plate fixation, hook screw fixation, welding and bolt joint fixation, etc. In order to adjust the horizontal direction, the hole on the rail pressing plate is usually made into a long hole, and a pad can be added under the rail for vertical adjustment. The rail pressing plate shall be designed with sufficient rigidity. Each pressing plate can be made into a single hole or double hole according to the force. Only when the rail is connected with the rail beam or the steel base plate fixed on the rail beam by welding, the car stop can be welded on the rail.

    Rail clamp and rail pad are also important parts of the crane rail system, which play the role of fixing the rail and buffering the impact on the rail respectively.

    Glory rail can provide various types of crane rails and related accessories to meet the different needs of customers. We will provide customers with a comprehensive solution for the whole crane rail system.

    Comments

    Post a Comment

    Popular posts from this blog

    30 LB RAIL FOR SALE

      30 LB RAIL FOR SALE What is a 30 lb rail? A 30 lb rail refers to a rail weighing 30 lb in meters, which is an ASCE 30 model rail produced according to ASTM A1. As a common light track, it is mainly used for laying mining track lines. Therefore, it is widely used in the South American market. The dimensions of the 30 lb rail are as follows: Head width: 42.9mm Track height: 79.4mm Track bottom width: 79.4mm Waist thickness: 8.4mm GloryRail is an important  mining rail  supplier in China. Engaged in rail supply for more than 20 years. Rail products are exported to many countries and regions around the world. Trusted and supported by many mining customers. We maintain long-term cooperative relationships with many important customers in Peru, Colombia, Panama, and Venezuela in South America BUY 30 LB RAIL FROM CHINA As the world’s most important rail tracks production base. There are six major steel mills in China producing rails with an annual output of millions of tons. G...
    Post a Comment
    Read more

    Study on Cooling Method of SUP9 Spring Flat Steel

    Study on Cooling Method of SUP9 Spring Flat Steel Hot rolled spring flat steel bar is mainly used for the automotive industry, and it’s the raw material for automobile leaf spring  manufacturing. The main varieties of spring steel include 60Si2Mn spring steel,  SUP9 spring steel flat bar , 55SiMnVB spring steel. SUP9 spring steel flat bar is produced in accordance with the Japanese standard. At present, many leaf spring manufacturers mostly use SUP9 spring steel as the raw material for manufacturing automotive leaf springs. Compared with 60Si2Mn, SUP9 spring steel has good hardenability and low decarburization tendency, so the mechanical properties and fatigue properties of the leaf springs produced with SUP9 spring steel are better than that of 60Si2Mn steel. However, due to the good hardenability of  SUP9 steel , the hardness is often too high during actual rolling production and cooling. The reheating, quenching and tempering treatment are carried out in...
    Post a Comment
    Read more

    Rail clip installation

    Rail clip installation rail clip installation Prerequisites for the rail clip installation 1. The rail presser is installed after the steel beam on the crane rails surface is adjusted; 2. The steel beam of the crane must be 3. The rail pressure device should be installed; 4. Before the installation of the  rail clamp , the surface paint of the crane beam is finished and meets the requirements of the current regulations; 5. Before the installation of the rail presser, the track joints should be connected, and the track joints and side bending deviations should meet the requirements of “Steel Structure Engineering and Acceptance Specifications”-83). 6. The welding of the base plate control plate and the steel suspension beam should meet the design requirements. Installation sequence and essentials A. Welding the fixed base, the fixed base can be used, the three grooves on the surface and the position of the rail presser can be positioned, and the allowable deviation of the position ...
    Post a Comment
    Read more