Skip to main content

Crane rail pads supplier from China

 

Crane rail pads supplier from China

Gloryrail is a crane rail pads supplier from China, we could offer two types of crane rail pads for continuously supported rail and discontinuous mounting.

Individual Rail Pad and Continuous Rail Pad

crane rail pads

crane rail pads

crane rail pads are made of rubber as the main raw material, scientific formula, and high-tech production technology. The rubber pad meets the railway speed-up and environmental protection requirements, and the use of it can improve the transportation capacity of the locomotive. The production and promotion of rubber pads has completely changed the old and backward paving materials such as asphalt, slate, steel plate and so on that have been used for a long time at railway level crossings. It has changed the backward state of uneven crossings, frequent accidents, and frequent maintenance. Laying, its beautiful environmental protection, quick installation and practicality, and solid and solid safety are gradually emerging. Pressure-resistant, abrasion-resistant, easy to install, firm in contact with the road, no impact and noise, good safety, special rubber preparation and joint research and development by the Ministry of Railways Professional Design Institute, high-tech, advanced technology and testing methods, the product quality is up to Leading domestic similar products.

Comments

Popular posts from this blog

EN R260 R350HT 60E1 UIC60 Steel Rail

  EN R260 R350HT 60E1 UIC60 Steel Rail Glory Rail  can supply all kinds of steel rails, including light rail, heavy rail, crane rail, and other different standards and specifications, like EN standard 60E1 UIC60 steel rail. 60E1 UIC60 steel rail  is mainly used as transportation railway rail for heavy vehicle, and it can be also used in underground mining and crane industry. Glory Rail could also offer EN standard rails, including 60E1 steel rail,  UIC60 steel rail, 54E1 steel rail, UIC54 steel rail., etc.  Specification: Size: 60E1 UIC60 steel rail Length: 5m~25m or other length according to customers’ requirement Material:  R200, R260, R260MN, R350HT Standard:  EN 13674 – 4 Materials: R200 Mechanical Property Chemical Composition Yield strength Tensile strength Elongation Hardness C Si Mn S P H ppm O  ppm MPa kg/mm² MPa kg/mm² min HB ≤ ≤ ≤ ≤ ≥680 14% 200-240 0.40-0.60 0.15-0.58 0.70-1.20 0.025 0.035 3.0 20 ………………………………………………………………………………………… R260...

Rail types

Rail types rail types When selecting steel rail types, the weight of electric locomotives and my cars, the speed of travel, and the density of traveling should be mainly considered. The larger the vehicle load, the faster the speed, the higher the driving density, and the larger the rail types. “Coal Mine Safety Regulations” stipulates that in newly built or expanded mines, the rails for running locomotives of 7 tons and above or mine cars of 3 tons and above should be not less than 30kg/m. The selection of the rail types of the good track should be determined according to the type of transportation equipment, the location of use, and the way of lifting. The steel rails in China can be divided into three types: crane rails (crane rails), heavy rails, and light rails based on the approximate weight of kilograms per meter: ①The  crane rail  is divided into four types: QU120, QU100, QU80, and QU70. The material is generally manganese steel. The largest single weight is QU120, wh...

Study on Cooling Method of SUP9 Spring Flat Steel

Study on Cooling Method of SUP9 Spring Flat Steel Hot rolled spring flat steel bar is mainly used for the automotive industry, and it’s the raw material for automobile leaf spring  manufacturing. The main varieties of spring steel include 60Si2Mn spring steel,  SUP9 spring steel flat bar , 55SiMnVB spring steel. SUP9 spring steel flat bar is produced in accordance with the Japanese standard. At present, many leaf spring manufacturers mostly use SUP9 spring steel as the raw material for manufacturing automotive leaf springs. Compared with 60Si2Mn, SUP9 spring steel has good hardenability and low decarburization tendency, so the mechanical properties and fatigue properties of the leaf springs produced with SUP9 spring steel are better than that of 60Si2Mn steel. However, due to the good hardenability of  SUP9 steel , the hardness is often too high during actual rolling production and cooling. The reheating, quenching and tempering treatment are carried out in...