Skip to main content

Installation method of the finned tube for gas stove

 


Installation method of the finned tube for gas stove

1. The finned tube for the gas stove must be handled with care when transporting, and it must not be damaged. The face mask that protects the product must not be scratched. Before installation, the equipment must be in accordance with the size, and Models are classified and placed in a ventilated and dry warehouse.
2. When installing, there are two types of top-in, top-out, and bottom-out. The finned tube for the gas stove must be cleaned of the protective material on the equipment before installation, and the hanger should be placed according to the position of the fixed hole and then proceed. Just adjust.
3. The equipment uses the special finned tube specifications for gas stoves. The entire system can be tested after installation, and the heating water value in the equipment must not exceed the rated value.

Comments

Popular posts from this blog

30 LB RAIL FOR SALE

  30 LB RAIL FOR SALE What is a 30 lb rail? A 30 lb rail refers to a rail weighing 30 lb in meters, which is an ASCE 30 model rail produced according to ASTM A1. As a common light track, it is mainly used for laying mining track lines. Therefore, it is widely used in the South American market. The dimensions of the 30 lb rail are as follows: Head width: 42.9mm Track height: 79.4mm Track bottom width: 79.4mm Waist thickness: 8.4mm GloryRail is an important  mining rail  supplier in China. Engaged in rail supply for more than 20 years. Rail products are exported to many countries and regions around the world. Trusted and supported by many mining customers. We maintain long-term cooperative relationships with many important customers in Peru, Colombia, Panama, and Venezuela in South America BUY 30 LB RAIL FROM CHINA As the world’s most important rail tracks production base. There are six major steel mills in China producing rails with an annual output of millions of tons. G...

Welding Process of Overhead Crane Rail Joint

Welding Process of Overhead Crane Rail Joint In order to make the overhead crane rail transport more stable, rail splints will not be used for the overhead crane rail joint connection, but welded joint connection will be used. The main key to the welded joint is to solve the bending deformation and weld cracking of the overhead crane rail joint. During the welding process of the overhead crane rail joint, the overhead crane rail joint is deformed downwardly, so the overhead crane rail end must be padded to a certain height before welding to ensure that the rail joint can be kept straight after the welding is completed. The height of the rail end pad is determined by factors such as the type of rail, length, fixing method and ambient temperature. The rails are fixed to the crane beam by means of hook bolts, and each joint is provided with four fixed points. After the bottom of the rail is welded, reduce the height to 20mm, and then tighten the hook bolts to continue welding. When the o...

South Korea’s Hot Rolled Steel Plate Production Will Decline this Year

South Korea’s Hot Rolled Steel Plate Production Will Decline this Year It is predicted that Korean domestic production of  hot rolled steel plate  will decline this year due to weak market demand. In the first half of the year, Korean domestic production of hot rolled steel plate was 6.048 million tons, a decrease of 4.8% year-on-year. The main reason for the reduction in production is the large-scale maintenance of related equipment, especially in September and October. Another reason is the recent weakening of demand in the domestic market in Korea. In the second half of this year, besides the small rebound in market demand in the construction industry, the consumption prospects of other downstream steel industries are bleak. However, considering the intensification of trade tensions between Japan and South Korea, South Korea may cut import of hot rolled steel plate, cold rolled steel sheets and pipes from Japan. Therefore, Korean hot rolled steel plate producers ...