China 50kg rail for sale Heavy Steel Rail

Glory Rail can supply all kinds of steel rails, including light rail, heavy rail, we do 50kg rail for sale for more than 15 years, we sell all kinds heavy steel rail, crane rail with different standards and specifications.

50kg/m heavy steel rail are mostly used for the transportation of larger mine roadways and factory workshops, crane hoisting equipment, and the laying of special railway lines.

Specification:

Size: 50kg/m

Length: 12m~25m or other length according to customers’ requirement

Material: 50Mn, U71Mn

Standard: GB2585-2007

Materials:

50Mn

Mechanical Property

Chemical Composition

Yield strength

Tensile strength

Elongation

Hardness

MPa

kg/mm²

MPa

kg/mm²

min

≤

≥390

≥40

≥645

≥66

13%

0.48-0.56

0.17-0.37

0.70-1.00

0.035

0.25

…………………………………………………………………………………………………

U71Mn

Mechanical Property

Chemical Composition

Yield strength

Tensile strength

Elongation

Hardness

MPa

kg/mm²

MPa

kg/mm²

min

≤

≥880

0.65-0.76

0.15-0.35

1.10-1.40

0.030

0.25

Heavy Rail

…………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

GLORY RAIL steel rail drawing

Standard: GB2585-2007

Size *	Rail height(mm) A	Bottom Width(mm) B	Head Width(mm) C	Web Thickness(mm) t	Weight(kg/m) *
38kg	134	114	68	13.0	38.730
43kg	140	114	70	14.5	44.653
50kg	152	132	70	15.5	51.514
60kg	176	150	73	16.5	60.640
75kg	192	150	75	20	74.414

……………………………………………………………………………………………………………………………………………………………………………………………

Comments

30 LB RAIL FOR SALE

30 LB RAIL FOR SALE What is a 30 lb rail? A 30 lb rail refers to a rail weighing 30 lb in meters, which is an ASCE 30 model rail produced according to ASTM A1. As a common light track, it is mainly used for laying mining track lines. Therefore, it is widely used in the South American market. The dimensions of the 30 lb rail are as follows: Head width: 42.9mm Track height: 79.4mm Track bottom width: 79.4mm Waist thickness: 8.4mm GloryRail is an important mining rail supplier in China. Engaged in rail supply for more than 20 years. Rail products are exported to many countries and regions around the world. Trusted and supported by many mining customers. We maintain long-term cooperative relationships with many important customers in Peru, Colombia, Panama, and Venezuela in South America BUY 30 LB RAIL FROM CHINA As the world’s most important rail tracks production base. There are six major steel mills in China producing rails with an annual output of millions of tons. G...

Welding Process of Overhead Crane Rail Joint

Welding Process of Overhead Crane Rail Joint In order to make the overhead crane rail transport more stable, rail splints will not be used for the overhead crane rail joint connection, but welded joint connection will be used. The main key to the welded joint is to solve the bending deformation and weld cracking of the overhead crane rail joint. During the welding process of the overhead crane rail joint, the overhead crane rail joint is deformed downwardly, so the overhead crane rail end must be padded to a certain height before welding to ensure that the rail joint can be kept straight after the welding is completed. The height of the rail end pad is determined by factors such as the type of rail, length, fixing method and ambient temperature. The rails are fixed to the crane beam by means of hook bolts, and each joint is provided with four fixed points. After the bottom of the rail is welded, reduce the height to 20mm, and then tighten the hook bolts to continue welding. When the o...

Rail clip installation

Rail clip installation rail clip installation Prerequisites for the rail clip installation 1. The rail presser is installed after the steel beam on the crane rails surface is adjusted; 2. The steel beam of the crane must be 3. The rail pressure device should be installed; 4. Before the installation of the rail clamp , the surface paint of the crane beam is finished and meets the requirements of the current regulations; 5. Before the installation of the rail presser, the track joints should be connected, and the track joints and side bending deviations should meet the requirements of “Steel Structure Engineering and Acceptance Specifications”-83). 6. The welding of the base plate control plate and the steel suspension beam should meet the design requirements. Installation sequence and essentials A. Welding the fixed base, the fixed base can be used, the three grooves on the surface and the position of the rail presser can be positioned, and the allowable deviation of the position ...

Glorysteelwork

Search This Blog