Skip to main content

New Design about Crane Rail Flat Bar Inspection Device


New Design about Crane Rail Flat Bar Inspection Device
Crane rail flat bar detection requires the detector to be as smooth as possible to reduce vibration and shaking during operation. The overall center of gravity should be as close as possible to the top of the crane rail flat bar and near the center axis of the crane rail flat bar to keep the unit stable. The target of the reflective target should be as close as possible to the center line of the top surface of the crane rail flat bar and ensure that the light is not blocked by itself when measuring. The crane rail flat bar clamping device of the instrument clamps the side of the rail through the guide wheel to maintain the running posture, and a spring urging mechanism is used to maintain the tension of the guide wheel to facilitate the passage of the rail joint and the unevenness of the side of the rail. The detector components are mainly designed with positioning components, clamping components, proximity switches, front wheel components, drive components, circuit board brackets, rear wheel components, trays, frames, reflective target lifting rods, reflective target bases, reflective targets, etc. One side of the instrument is a positioning component, which is used to ensure the running direction of the rail along the rail direction, and to ensure that the center line of its shape coincides with the center line of the top surface of the rail. The positioning arm is in contact with the inclined side of the rail 1:10, and the joint bearing is used as the contact part, and the contact has become the surface contact, which ensures the positioning and clamping clarity.
The other side of the instrument is a clamping part. The joint bearing seat and the positioning arm are connected by springs and bolts, mainly for the purpose of ensuring that the positioning parts are not stuck during operation under the premise of packaging positioning accuracy. During the installation process of the rail, the two clamping members and the two positioning members can be rotated 180° about the fixed axis to the rail face to clamp the side of the track to clamp the track. Both the clamping part and the positioning part are equipped with anti-rollover arms, which can be twisted around the rotating shaft under the action of the torsion spring. When an obstacle is encountered, the rollover arm can be rotated to avoid the obstacle. When the device is turned over in an unexpected situation, the anti-rollover arm can hold the track tightly to ensure safety and reliability. The reflective target lifting rod can adjust the elongation distance of the reflective target to ensure that the measured light is not blocked by the instrument itself at different orbital heights.

Comments

Post a Comment

Popular posts from this blog

30 LB RAIL FOR SALE

  30 LB RAIL FOR SALE What is a 30 lb rail? A 30 lb rail refers to a rail weighing 30 lb in meters, which is an ASCE 30 model rail produced according to ASTM A1. As a common light track, it is mainly used for laying mining track lines. Therefore, it is widely used in the South American market. The dimensions of the 30 lb rail are as follows: Head width: 42.9mm Track height: 79.4mm Track bottom width: 79.4mm Waist thickness: 8.4mm GloryRail is an important  mining rail  supplier in China. Engaged in rail supply for more than 20 years. Rail products are exported to many countries and regions around the world. Trusted and supported by many mining customers. We maintain long-term cooperative relationships with many important customers in Peru, Colombia, Panama, and Venezuela in South America BUY 30 LB RAIL FROM CHINA As the world’s most important rail tracks production base. There are six major steel mills in China producing rails with an annual output of millions of tons. G...
Post a Comment
Read more

Study on Cooling Method of SUP9 Spring Flat Steel

Study on Cooling Method of SUP9 Spring Flat Steel Hot rolled spring flat steel bar is mainly used for the automotive industry, and it’s the raw material for automobile leaf spring  manufacturing. The main varieties of spring steel include 60Si2Mn spring steel,  SUP9 spring steel flat bar , 55SiMnVB spring steel. SUP9 spring steel flat bar is produced in accordance with the Japanese standard. At present, many leaf spring manufacturers mostly use SUP9 spring steel as the raw material for manufacturing automotive leaf springs. Compared with 60Si2Mn, SUP9 spring steel has good hardenability and low decarburization tendency, so the mechanical properties and fatigue properties of the leaf springs produced with SUP9 spring steel are better than that of 60Si2Mn steel. However, due to the good hardenability of  SUP9 steel , the hardness is often too high during actual rolling production and cooling. The reheating, quenching and tempering treatment are carried out in...
Post a Comment
Read more

Rail clip installation

Rail clip installation rail clip installation Prerequisites for the rail clip installation 1. The rail presser is installed after the steel beam on the crane rails surface is adjusted; 2. The steel beam of the crane must be 3. The rail pressure device should be installed; 4. Before the installation of the  rail clamp , the surface paint of the crane beam is finished and meets the requirements of the current regulations; 5. Before the installation of the rail presser, the track joints should be connected, and the track joints and side bending deviations should meet the requirements of “Steel Structure Engineering and Acceptance Specifications”-83). 6. The welding of the base plate control plate and the steel suspension beam should meet the design requirements. Installation sequence and essentials A. Welding the fixed base, the fixed base can be used, the three grooves on the surface and the position of the rail presser can be positioned, and the allowable deviation of the position ...
Post a Comment
Read more