Skip to main content

Global Dockyards Have Fewer and Fewer Orders

Global Dockyards Have Fewer and Fewer Orders
As of early August 2019, global handheld orders accounted for approximately 10% of the existing fleet (GT), a ratio that has created the lowest level in the past 20 years. Glory Steel could offer CCSA shipbuilding plate for dockyards. At the same time, global hand-held orders have fallen by nearly 60% in 10 years, and global hand-held orders have fallen to their lowest level in the past 15 years. According to a recent report issued by Clarkson, in the world’s top 10 shipowners (ranked by the total tonnage of the fleet in early August), Korean shipowners’ orders accounted for the highest proportion of existing fleets, which reached 24%. Especially in the container ship sector, Korean shipowners’ container ships accounted for 62% of the existing fleet, which thanks to the 20 super-large container ships that Hyundai Merchant Marine had ordered in 2018. However, South Korean shipowners hold only 9% of the world’s total hand-held orders, ranking fourth in the world. At the same time, Japanese shipowners hold 17% of the existing fleet, second only to South Korea. However, Japanese shipowners hold the largest share of total global hand-held orders, about 21%. US shipowners hold orders in the current fleet ratio of about 14%, ranking third. In addition, although the number of orders held by Chinese shipowners in the world’s total handheld orders is second only to Japan, up to 15%, the proportion of orders held by Chinese shipowners in the existing fleet is only 11%. The orders reduction of the dockyards caused pressure for CCSA shipbuilding plate manufacturers.
Among the top 10 shipowners, German shipowners hold the lowest proportion of existing fleets, only 3.6%. In 2008, this ratio was once nearly 60%. Among them, German-owned container ships accounted for less than 1% of the existing fleet, while the figure for 2005 was nearly 70%. Although the Greek shipowner has the largest fleet in the world and has the world’s third largest handheld order volume, Greek shipowners hold only 6.9% of the existing fleet. In recent years, Greek shipowners have been active in the new shipbuilding market for LNG ships. At present, Greek shipowners’ LNG ships hold about 68% of the existing fleet, but their bulk carrier orders account for the current fleet ratio from 2008. 56% to only 3%.
By region, in early August 2019, European shipowners’ orders for existing fleets were about 8%, lower than the global average. While Asia-Pacific shipowners accounted for more than 13% of existing fleets. At the same time, European shipowners hold 33% of the world’s total hand-held orders, and Asia-Pacific shipowners account for 53%. These data show that although the current fleet size of European shipowners (604 million GT) is still larger than the fleet size of the shipowners in the Asia-Pacific region (568 million GT), the gap between the two may be further narrowed in the future. According to Clarkson statistics, as of August 16, 2019, the global shipyard held orders for 3,202 vessels 79,524,034 CGT. According to CGT, this figure is about 60% lower than in 2009, the lowest since 2004. According to the latest statistics of Clarkson, the current global fleet size exceeds 1.35 billion GT, of which 57% of the ship’s tonnage is controlled by the six major shipowners. The top 10 shipowners are Greece, China, Japan, Germany, USA, Norway, South Korea, Singapore, Italy and Denmark.

Comments

Popular posts from this blog

30 LB RAIL FOR SALE

  30 LB RAIL FOR SALE What is a 30 lb rail? A 30 lb rail refers to a rail weighing 30 lb in meters, which is an ASCE 30 model rail produced according to ASTM A1. As a common light track, it is mainly used for laying mining track lines. Therefore, it is widely used in the South American market. The dimensions of the 30 lb rail are as follows: Head width: 42.9mm Track height: 79.4mm Track bottom width: 79.4mm Waist thickness: 8.4mm GloryRail is an important  mining rail  supplier in China. Engaged in rail supply for more than 20 years. Rail products are exported to many countries and regions around the world. Trusted and supported by many mining customers. We maintain long-term cooperative relationships with many important customers in Peru, Colombia, Panama, and Venezuela in South America BUY 30 LB RAIL FROM CHINA As the world’s most important rail tracks production base. There are six major steel mills in China producing rails with an annual output of millions of tons. G...

Study on Cooling Method of SUP9 Spring Flat Steel

Study on Cooling Method of SUP9 Spring Flat Steel Hot rolled spring flat steel bar is mainly used for the automotive industry, and it’s the raw material for automobile leaf spring  manufacturing. The main varieties of spring steel include 60Si2Mn spring steel,  SUP9 spring steel flat bar , 55SiMnVB spring steel. SUP9 spring steel flat bar is produced in accordance with the Japanese standard. At present, many leaf spring manufacturers mostly use SUP9 spring steel as the raw material for manufacturing automotive leaf springs. Compared with 60Si2Mn, SUP9 spring steel has good hardenability and low decarburization tendency, so the mechanical properties and fatigue properties of the leaf springs produced with SUP9 spring steel are better than that of 60Si2Mn steel. However, due to the good hardenability of  SUP9 steel , the hardness is often too high during actual rolling production and cooling. The reheating, quenching and tempering treatment are carried out in...

Rail clip installation

Rail clip installation rail clip installation Prerequisites for the rail clip installation 1. The rail presser is installed after the steel beam on the crane rails surface is adjusted; 2. The steel beam of the crane must be 3. The rail pressure device should be installed; 4. Before the installation of the  rail clamp , the surface paint of the crane beam is finished and meets the requirements of the current regulations; 5. Before the installation of the rail presser, the track joints should be connected, and the track joints and side bending deviations should meet the requirements of “Steel Structure Engineering and Acceptance Specifications”-83). 6. The welding of the base plate control plate and the steel suspension beam should meet the design requirements. Installation sequence and essentials A. Welding the fixed base, the fixed base can be used, the three grooves on the surface and the position of the rail presser can be positioned, and the allowable deviation of the position ...