Skip to main content

Experimental Study on Cold Drawn Steel Square Bar

Experimental Study on Cold Drawn Steel Square Bar

Cold drawn steel square bar refers to square cold drawn steel. Under normal temperature conditions, the tensile stress exceeds the strength of the original steel yield point, and the steel bar is forced to be stretched, so that the steel bar is plastically deformed to improve the yield point strength and save the steel. Cold drawn steel is a cold extrusion technology with precise mold to pull out all kinds of high-precision, smooth-surface round steel, square steel, flat steel, hexagonal steel and other special-shaped steel. High-precision cold drawn steel square bar is a versatile profile.
The cold drawn steel products have the following advantages, like various shapes and specifications. Cold drawn steel bar with different section shapes and different specification tolerance can be drawn by designing molds of different shapes. The angles can be designed to be right angled or rounded. High precision, high quality carbide molds and professional molders ensure accurate and uniform tolerances. The smooth surface and advanced cold extrusion process make the surface of cold drawn steel square bar products smooth and bright. A large amount of material can be saved through cold drawn process. Cold drawing process is to cold-extrude the raw material to the shape, specifications and tolerances required. The loss of raw materials is very small. Compared with the materials consumed by the traditional lathe machining and cutting, the material saved by cold-drawn steel is very impressive. Especially when the amount of materials is large, and the material cost is more significant. Processing time and processing machinery are saved too much. Due to accurate accuracy, good surface condition, cold drawn steel products can be used directly, such as spraying, sanding, bending, drilling. The cold drawn steel produces can also be directly electroplated after the actual requirements without a lot of machining time and cost savings in the configuration of processing machinery.
Glory Steel mainly sells cold drawn steel round bar, cold drawn steel flat bar, cold drawn steel square bar, bright steel bar, cold drawn steel hexagonal bar. Our products are widely used in the aviation industry, automotive industry, machinery manufacturing industry. The cold drawn steel products are widely used in aviation, automobiles, standard parts, machine tools, agricultural machinery, machinery manufacturing and other industries. Our products export all over the country, like South Korea, Japan, Philippines, Indonesia, Malaysia,  Ecuador, etc.

Comments

Popular posts from this blog

30 LB RAIL FOR SALE

  30 LB RAIL FOR SALE What is a 30 lb rail? A 30 lb rail refers to a rail weighing 30 lb in meters, which is an ASCE 30 model rail produced according to ASTM A1. As a common light track, it is mainly used for laying mining track lines. Therefore, it is widely used in the South American market. The dimensions of the 30 lb rail are as follows: Head width: 42.9mm Track height: 79.4mm Track bottom width: 79.4mm Waist thickness: 8.4mm GloryRail is an important  mining rail  supplier in China. Engaged in rail supply for more than 20 years. Rail products are exported to many countries and regions around the world. Trusted and supported by many mining customers. We maintain long-term cooperative relationships with many important customers in Peru, Colombia, Panama, and Venezuela in South America BUY 30 LB RAIL FROM CHINA As the world’s most important rail tracks production base. There are six major steel mills in China producing rails with an annual output of millions of tons. G...

Welding Process of Overhead Crane Rail Joint

Welding Process of Overhead Crane Rail Joint In order to make the overhead crane rail transport more stable, rail splints will not be used for the overhead crane rail joint connection, but welded joint connection will be used. The main key to the welded joint is to solve the bending deformation and weld cracking of the overhead crane rail joint. During the welding process of the overhead crane rail joint, the overhead crane rail joint is deformed downwardly, so the overhead crane rail end must be padded to a certain height before welding to ensure that the rail joint can be kept straight after the welding is completed. The height of the rail end pad is determined by factors such as the type of rail, length, fixing method and ambient temperature. The rails are fixed to the crane beam by means of hook bolts, and each joint is provided with four fixed points. After the bottom of the rail is welded, reduce the height to 20mm, and then tighten the hook bolts to continue welding. When the o...

Rail clip installation

Rail clip installation rail clip installation Prerequisites for the rail clip installation 1. The rail presser is installed after the steel beam on the crane rails surface is adjusted; 2. The steel beam of the crane must be 3. The rail pressure device should be installed; 4. Before the installation of the  rail clamp , the surface paint of the crane beam is finished and meets the requirements of the current regulations; 5. Before the installation of the rail presser, the track joints should be connected, and the track joints and side bending deviations should meet the requirements of “Steel Structure Engineering and Acceptance Specifications”-83). 6. The welding of the base plate control plate and the steel suspension beam should meet the design requirements. Installation sequence and essentials A. Welding the fixed base, the fixed base can be used, the three grooves on the surface and the position of the rail presser can be positioned, and the allowable deviation of the position ...