Skip to main content

Gantry crane track design

 


Gantry crane track design

  1. Gantry crane track design – track and lining plate

The track and lining plate must be laid on a solid foundation, and the height of the tracks on both sides must be on a horizontal plane. Moreover, the track cannot be corroded, and the acceptance capacity of the steel structure must be strong.

  1. Gantry crane track design – track appearance

The appearance of the track must be checked. There should be neither protruding nor concave parts on it. The gantry crane must be tilted after vibration.

  1. Gantry track design – track connection

The laying of both ends of the track is the key point. It must be connected with fish plates, which are fixed with multiple bolts.

It is safest to control the error height within 3cm.

Comments

Post a Comment

Popular posts from this blog

30 LB RAIL FOR SALE

  30 LB RAIL FOR SALE What is a 30 lb rail? A 30 lb rail refers to a rail weighing 30 lb in meters, which is an ASCE 30 model rail produced according to ASTM A1. As a common light track, it is mainly used for laying mining track lines. Therefore, it is widely used in the South American market. The dimensions of the 30 lb rail are as follows: Head width: 42.9mm Track height: 79.4mm Track bottom width: 79.4mm Waist thickness: 8.4mm GloryRail is an important  mining rail  supplier in China. Engaged in rail supply for more than 20 years. Rail products are exported to many countries and regions around the world. Trusted and supported by many mining customers. We maintain long-term cooperative relationships with many important customers in Peru, Colombia, Panama, and Venezuela in South America BUY 30 LB RAIL FROM CHINA As the world’s most important rail tracks production base. There are six major steel mills in China producing rails with an annual output of millions of tons. G...
Post a Comment
Read more

Rail clip installation

Rail clip installation rail clip installation Prerequisites for the rail clip installation 1. The rail presser is installed after the steel beam on the crane rails surface is adjusted; 2. The steel beam of the crane must be 3. The rail pressure device should be installed; 4. Before the installation of the  rail clamp , the surface paint of the crane beam is finished and meets the requirements of the current regulations; 5. Before the installation of the rail presser, the track joints should be connected, and the track joints and side bending deviations should meet the requirements of “Steel Structure Engineering and Acceptance Specifications”-83). 6. The welding of the base plate control plate and the steel suspension beam should meet the design requirements. Installation sequence and essentials A. Welding the fixed base, the fixed base can be used, the three grooves on the surface and the position of the rail presser can be positioned, and the allowable deviation of the position ...
Post a Comment
Read more

What are railway rail fasteners？

What are railway rail fasteners？ Railway rail fasteners Railway rail fasteners are a kind of railway accessories. The parts used to combine rails and sleepers (or other types of under-rail foundations) on the track are also called central joint parts. Its function is to fix the steel rail on the sleeper, maintain the gauge and prevent the longitudinal and lateral movement of the rail relative to the sleeper. The railway rail fastener system is divided into the shrapnel fastener system, gusset fastener system, and elastic strip fastener system. The gusset-type fastener is composed of a gusset plate, a threaded spike, a spring washer, an iron seat, and a buffer pad. The threaded spike is anchored in the reserved hole of the concrete sleeper bearing platform with sulfur cement mortar, and then bolts are used to fasten the buckle. Plate fastened. There are elastic strips I, II, and III types of clip fasteners. Type I elastic strip is composed of ω elastic strip,  screw spike , gauge b...
Post a Comment
Read more