Overhead crane rail flat bar

Glory Rail supply the whole range of crane rail.
This kind rail track is used in the crane railway. It is common in port crane and plant construction. This rail material has high strength compare to the normal rail track, Glory Rai could offer various standard rail track, such as AREMA, GB, BS, DIN, UIC, and other custom rail tracks.
In addition, Glory Rail also could supply flat bar crane rail, when we use this crane rail flat bar as overhead crane rail,it also can increases the strength of beam crane structure as strutting piece.

Advantages:

Smooth surface
Fast and easy installation
Flat bar crane rail angle radius to protect your crane wheel
We guarantee each steel bar crane rail extremely straight through straighten machine.

Overhead crane rail flat bar

Comments

What are railway rail fasteners？

What are railway rail fasteners？ Railway rail fasteners Railway rail fasteners are a kind of railway accessories. The parts used to combine rails and sleepers (or other types of under-rail foundations) on the track are also called central joint parts. Its function is to fix the steel rail on the sleeper, maintain the gauge and prevent the longitudinal and lateral movement of the rail relative to the sleeper. The railway rail fastener system is divided into the shrapnel fastener system, gusset fastener system, and elastic strip fastener system. The gusset-type fastener is composed of a gusset plate, a threaded spike, a spring washer, an iron seat, and a buffer pad. The threaded spike is anchored in the reserved hole of the concrete sleeper bearing platform with sulfur cement mortar, and then bolts are used to fasten the buckle. Plate fastened. There are elastic strips I, II, and III types of clip fasteners. Type I elastic strip is composed of ω elastic strip, screw spike , gauge b...

What are seamless rails? seamless rails Continuous seamless rails, also known as a welded long rail line, is a line that welds ordinary rails without leaving rail seams. meters or longer. The long rails are laid and fixed on the sleepers within the specified temperature range. There are rail slits at the end of the long rail, and the middle part cannot expand or contract with the temperature rise and fall. Therefore, the middle section of the steel rail will generate a large temperature pressure in summer and a large temperature tension in winter. The large pressure and tensile force in the rail can be calculated according to the annual high and low temperature of the place where the rail is laid. The large pressure on the rail should not cause the rail to buckle, and the large tensile force should not cause the rail to break. The seamless rails line greatly reduces the rail joints , reduces the impact on the rails when the wheels pass through the joints, is conducive to s...

Rail clip installation

Rail clip installation rail clip installation Prerequisites for the rail clip installation 1. The rail presser is installed after the steel beam on the crane rails surface is adjusted; 2. The steel beam of the crane must be 3. The rail pressure device should be installed; 4. Before the installation of the rail clamp , the surface paint of the crane beam is finished and meets the requirements of the current regulations; 5. Before the installation of the rail presser, the track joints should be connected, and the track joints and side bending deviations should meet the requirements of “Steel Structure Engineering and Acceptance Specifications”-83). 6. The welding of the base plate control plate and the steel suspension beam should meet the design requirements. Installation sequence and essentials A. Welding the fixed base, the fixed base can be used, the three grooves on the surface and the position of the rail presser can be positioned, and the allowable deviation of the position ...

Glorysteelwork

Search This Blog